Call Aerco: +44(0)1403 260206
Email Aerco 

Rectangular Connectors

Smiths Interconnect offer a broad range of modular and rectangular connectors. Their modular solutions allow the user to customize, configure and combine signal, power, coax, twinax, triax, quadrax, filter and fibre optic contacts into a single connector.

 

For more information or to request a quote please contact Mark Ogden or call on +44(0)1403 260206.

 

 

 

 

B Series Connectors

B Series Connectors:

  • Modularity connector with mixed signal, power, coaxial and high speed contacts.
  • Up to 100 signal 1.50mm contacts and 500 mating cycles.
  • Interchangeable contact retaining system.
  • Bilevel contact modules (BC, BGD).
  • In compliance with NF F61-030, NF F16-101, NF F16-102.

Open pdf Document in new window B Series Connector Datasheet

Fibre Channel D-Sub Connectors

Fibre Channel D-Sub Connectors:

  • Standard keyed and non-keyed insert arrangements: 2, 4, 6, 8 way; hybrid options available.
  • Offered with 150 Ohm impedance Data rates up to 6.25 Gbps.
  • Six-position keyed and non-keyed jack post versions.
  • Common back shells with a wide assortment of accessories, guide hardware and sealing grommets.
  • Integrated EMI spring fingers offer superior EMI performance with low contact resistance.

Open pdf Document in new window Fibre Channel D-Sub Datasheet

Filter Combo D-Sub Connectors

Filter Combo D-Sub Connectors:

  • MIL-DTL-24308, MIL-DTL-83513 Micro-D and Combo D-Sub style connectors.
  • EMI/RFI filtering and transient protection. Aluminium shell.
  • Intermateable and Interchangeable with standard non-filter connectors.
  • Exceed all applicable requirements of defence specifications.
  • PC tail, solder cup, and solderless press-fit terminations.

Open pdf Document in new window Filter Combo D-Sub Datasheet

Filtered Rack & Panel Connectors

Filtered Rack & Panel Connectors:

  • Meets or exceeds all applicable requirements of military specifications.
  • Offered in a number of different contact arrangements and shell sizes.
  • C, L, Pi filter types Filtering technology (Planar Arrays, Discoidal) to suit application.
  • Unfiltered (high speed) and ground lines.
  • Transient Protection to RTCA D160F Section 22 levels 3,4 & 5.
  • Protection against primary lightning, EMI and EMP.

Open pdf Document in new window Filtered Rack & Panel Datasheet

H Series Connectors

H Series Connectors:

  • High density, with up to 1000 signal 0.60mm contacts.
  • Modularity: can mixed signal, power and coaxial contacts.
  • Metallic shell with cable clamp from 12mm to 25mm.
  • 5000 mating cycles with threaded jackscrew, 15000 with 1/2 turn jackscrew.


Contact Aerco for more information

High Speed Arinc 600 Connectors

High Speed Arinc 600 Connectors:

  • Bandwidth: Up to 3 Gigahertz Low-latency, high-throughput signal processing applications.
  • Data rates exceeding 2 Gbit/Sec supported, with Low skew & jitter.
  • Matched impedance differential contact pairs.
  • Differential Twinax & Quadrax support.
  • Standard & Custom Insert Arrangements.
  • Anti-Rotational Cavities.

Open pdf Document in new window High Speed Arinc 600 Datasheet

High Speed MIL-DTL-83527 Connectors

High Speed MIL-DTL-83527 Connectors:

  • Isolated cavities available for tempest applications.
  • Contact patterns include mixed Signal, Power, Coax, Triax, fibre Optic (ARINC 801 and Expanded Beam Contacts) Twinax and Quadrax contacts for standard or custom insert arrangements.
  • EMI/RFI environmentally sealed back-shells.
  • Single or Multiport exit termination points with standard MIL-DTL-38999 back-shells.

Open pdf Document in new window High Speed MIL-DTL-83527 Datasheet

HyperMod Series Connectors

HyperMod Series Connectors:

  • Modularity mixed signal, power, coaxial, high speed and fibre optics contacts.
  • IP67 rugged aluminum shell.
  • Several housing & hoods, single or double locking systems.
  • Conforms to DIN 43652 standards and NF F61-030 railways approved.
  • High shock and vibration proof: EMI & RFI protection.

Open pdf Document in new window HyperMod Series Datasheet

L Series Connectors

L Series Connectors:

  • Mixed signal, power, and coaxial modules. Provides up to 200 amps power.
  • Cable to chassis and rack & panel; Plastic backshell with strain relief and half turn quick disconnect jackscrew.
  • Float mountable for blind mating.
  • Configurations compliant to EN45545 standards Different signals.
  • High reliability contact technology.
  • Several locking devices and hood are available.

Open pdf Document in new window L Series Datasheet

LHS/LHZ Series Connectors

LHS/LHZ Series Connectors:

  • Flat floating connector, ideal for blind mating.
  • Mixed power, signal, coaxial and quadrax contacts.
  • Rack/panel applications (norm XPF61-005).
  • Compliant with NF F 61-032 standards.
  • High contact density, up to 70 signal contacts.

Open pdf Document in new window LHS/LHZ Series Datasheet

LSH Series Connectors

LSH Series Connectors:

  • 1 to 6 way 6mm contacts with 200 amps per contact.
  • Very low mating forces.
  • Radial float .049" (1.25mm).
  • Threaded terminals.
  • Blind mate capability.

Open pdf Document in new window LSH Series Datasheet

MDCX Series Connectors

MDCX Series Connectors:

  • MDCX VSWR of 1.25:1 (typ) up to 10 GHz (max mated pair).
  • Maximum overall diameter of 0.125" fitted into low-profile Micro-D housing.
  • Constant 50 Ohm airline impedance.



Open pdf Document in new window MDCX Series Datasheet

MDHC Series Connectors

MDHC Series Connectors:

  • MDHC VSWR of 1.5:1 (typ) up to 40GHz (max mated pair).
  • Maximum overall diameter of 0.125" fitted into low-profile Micro-D housing.
  • Constant 50 Ohm airline impedance.



Open pdf Document in new window MDHC Series Datasheet

Micro-D Filter Series Connectors

Micro-D Filter Series Connectors:

  • MMIL-DTL-24308, MIL-DTL-83513 Micro-D and Combo D-Sub style connectors.
  • EMI/RFI filtering and transient protection.
  • Inter-mateable and Interchangeable with standard non-filter connectors.
  • Exceed all applicable requirements of defence specifications.
  • PC tail, solder cup, and solderless press-fit terminations.

Open pdf Document in new window Micro-D Filter Series Datasheet

MIL-DTL-24308 (D-Sub) Connectors

MIL-DTL-24308 (D-Sub) Connectors:

  • MIL-DTL-24308 D Sub-miniature filter connectors.
  • Inter-mateable and interchangeable with the standard non-filtered connectors.
  • Combo D-Sub arrangements for power coaxial and signal contacts mixed arrangements.
  • Layouts include 5W5, 8W8, 17W2, 9W1 and 24W7.


Contact Aerco for further information

N Series Connectors

N Series Connectors Connectors:

  • VITA 66.1 multichannel motherboard / daughter card connectors for ruggedized optical backplane Interconnects.
  • Provides a high-density, blind-mate optical interconnect in a backplane/daughtercard configuration.
  • Up to two MT ferrules per connector, each accommodating up to 24 fibre paths.

Open pdf Document in new window N Series Datasheet

REP Series Connectors

REP Series Connectors:

  • Conforms to main rail standards.
  • 2, 6 and 12 way standard insulators.
  • Crimp, straight or bent termination options.
  • Smart design with integrated functions.
  • Shunts available as required.

Open pdf Document in new window REP Series Datasheet

Rugged D-Sub Quadrax/Twinax Series Connectors

Rugged D-Sub Quadrax/Twinax Series Connectors:

  • Low RF noise and high durability of up to 1,000 mating cycles.
  • Offered with 100 ohm quadrax and/or differential pair twinax contacts.
  • Size 10 contacts are 30% smaller package size for tight space constraints.
  • Cable assembly options available.


Open pdf Document in new window Rugged D-Sub Quadrax/Twinax Series Datasheet

SnapTac Series Connectors

SnapTac Series Connectors:

  • Lightweight, robust, quick release, miniature connector.
  • IP67 sealing, EMI shielding.
  • Available in both circular (7, 13, 19 way) and rectangular (12, 21, 30 ways).
  • Equipped with Hyperspring contacts.
  • Designed to protect the electrical interface against extreme environmental conditions.
  • Shell Material: Aluminum.

Open pdf Document in new window SnapTac Series Datasheet

Transformer Series Connectors

Transformer Series Connectors:

  • High density modular solution.
  • High power, up to 300A / 500A.
  • Straight, angled and shunt termination styles.
  • Cable section size from 25mm² to 50mm² / 240mm².


Open pdf Document in new window Transformer Series Datasheet

Company Reg. No. 572109

 

VAT Registration No. GB 602 4417 81