Daniels Tools pneumatic power crimp tools WA27F, WA2P and WA22 are direct equivalents of their corresponding hand tools. Compact in size and light weight, the pneumatic tools are widely used in both military and proprietary programs. The upper, middle or lower range power tools fulfill the same precise crimp requirements as the hand models. Using the same indenter configuration, the same gaging dimensions and selector settings, no additional operator training is necessary.

Accurate calibration is maintained by a unique 8 step machined steel block that holds gaging tolerances far longer than the usual adjustment screw method.

Solid gaging means high output with less downtime.

Hand trigger is designed for equal ease of use by right or left handed operators.

The bench mount will allow the tool to be secured at virtually any angle for individual comfort, thereby minimizing operator fatigue.

Foot valve, when installed in-line with an air supply, makes a portable system which is adaptable to any work bench.

 Air supply requirements are 80-120 PSI (5.5 to 8.0 atmospheres) clean dry air. The system uses standard air fitting readily available in most shops.

UPPER RANGE WA27F (EQUIVALENT TO AF8) accommodates TH-XXXMIL-STD heads. TH-XXX series turret heads or TP-XXX series positioners, length 10”, diameter 2 ¾”, weight 50 oz.

MIDDLE RANGE WA22P (EQUIVALENT TO MH860) accommodates 86-XXX series positioners, length 8”, diameter 2 ¼”, weight 32 oz.

LOWER RANGE WA22 (EQUIVALENT TO AFM8) accommodates K series positioners, length 8”, diameter 2 ¼”, weight 32 oz.

BENCH MOUNT BM-2

FOOT VALVE WA10