The Miniature Adjustable Crimp Tools range from Daniels Tools is a lower range crimp tool qualified to MIL-DTL-22520/2 (M22520/2-01). The  AFM8, originally developed for the Air Force, is designed for most of the miniature and sub-miniature connector types that are so widely used in all type of electronic systems and meets the need for a miniature tool accommodating wire sizes 20 through 32 AWG.

The AFM8 gives a Mil-Standard 8 impressing crimp, which assures maximum tensile strength whilst the cycle controlled precision ratchet assures consistently accurate crimps every time.  The tool frame has a built-in 8 step selector knob for ease in dialling the connect crimp depth setting for the wire being used.

Positioners adapt the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position.  Raising the knob and rotating it to the proper position dial the crimp depth on the 8 step selector knob. The positioner is easily removed and changed.

Periodic gaging is recommended to insure accurate calibration.  This is easily accomplished with the M22520/3-1 “G0/NO-GO” gage (part no. G125).  The AFM8 is 6 ¾” in length and weighs approximately 10 oz.

No operator maintenance is required other than keeping the tool clean and properly stored when not in use. Complete instructions concerning the use, care and warranty are supplied with each tool.  Additional copies are available from the factory. 

Ultra Precision Crimp Tool (Model MH800)

The model MH800 Ultra Precision Crimp Tool which utilizes the same basic components as the Model AFM8 (M22520/2-01) Crimp Tool with tighter gaging tolerances and a special indenter tip configuration that assures a uniform flow of metal during the crimping operation. The model MH800 accommodates wire sizes 20 through 32 AWG (the miniature to sub-miniature range). It accommodates the K series of M22520-2-XX positioners and is easily identified by a distinctive orange handle grip. It is the same size and weight as model AFM8. Gaging is accomplished with the G100 “GO/NO-GO” gage.

Middle Range Crimp Tool MH860 M22520/7-01

MIL-C-28840 Tooling.

MIL-C-28840 connectors, developed for the Navy, use jacketed cable in shipboard applications. They are a high density circular connector series utilizing a high shock threaded coupling system with front release crimped contacts. For these connectors a new crimping tool the M22520/34-01 has been added to the range, and other tools as follows: