Ten separate devices can monitor the steady state of ten different physical characteristics of a piece of equipment. A particular device is set to an input value as "normal." If this value drifts, an alarm is generated. This alarm allows investigation of the source of the detected fault. The device output is digital; a dual color LED is normally green, indicating normal. Should the device detect a fault, the LED turns red. At the same time, the device’s output will change state from open to closed. This output can be connected to an alarm or PLC input, allowing the alarm to be graphically shown and to generate a "system" alarm. The color-coded devices are simple to set up and use.

Best Used For:
Applications requiring independent control system monitoring for temperature loss or rise, vibration, fluid flow or leak, mechanical noise or wear, slope change, mechanical insertion or audible noise.