L562 MINIATURE GLASS FUSELINKS 

This range of size 00 (15.9mm x 4.7mm) fuse links is widely used for circuit

protection in the telecommunications and electronics industries.

Ratings from 50mA to 150mA blow within 10 seconds at three times their rated current.

Ratings 250mA to 7A blow within 10 seconds at twice their rated current.

L562 PCB MOUNTING FUSELINKS

These fuselinks are designed for direct mounting into printed circuit boards and are available as quick acting miniature glass types.

L693 CERAMIC, FILLED FUSE

These size 0 (32mm x 6.3mm), sand filled, standard fuse links are of the

highest quality, having a category of duty of 440 Va.c., 230 Vd.c. (maximum

prospective overload 33,000 A at 0.3 pf and 440 Va.c. or 230 Vd.c.) (Time

constant 0.015ms.) Minimum life is 1,000 hours continuous at rated current at

temperatures up to 35°C. 1,000 hours continuous at 80% rated current at

temperatures beyond 35°C up to 85°C.

L754 MINIATURE CERAMIC FUSELINKS

These size 00 (15.9mm x 4.7mm),sand filled fuse links have a high rupturing capacity and a category duty of 250V a.c. or 250V d.c. (Maximum prospective overload 4000A at 0.4pf and 250Va.c. and 230 V d.c. Time constant 0.004s.)

L754 PCB MOUNTING FUSELINKS

These fuselinks are designed for direct mounting into printed circuit boards and are available as H.R.C. ceramic types.

The H.R.C. ceramic fuselinks protect against high prospective overload currents and are therefore suited for application in hazardous environments such as those encountered in the petro-chemical and mining industries. Marking on the fuselink body includes the rating which is visible when the fuselink is mounted on the P.C.board.

L1O55A STANDARD GLASS FUSELINK

These size 0 (32mm x 6.3mm) standard glass fuse links are for protection of

telecommunications and light electrical equipment. They have a minimum life of 1,000 hours continuous rated current at 25°C. They blow within 10 seconds a 2 x In (+20% to 0%). The derating for operation at elevated temperatures is: 1.75% per 10°C up to 100°C.

L1330A LOW VOLTAGE HEAVY DUTY FUSE

These robust, self contained (needing no holder) fuses afford short circuit protection for the supply and overload protection for welding equipment, heavy current rectifier units, the motors of battery driven vehicles, hoists and winches.

Housed in a strong ceramic case, with a shatter-proof windows for visual inspection of the fuse equipment; this is integral with the solid terminal lugs by which the fuse may be mounted directly in the supply line. These terminal lugs are slotted for quick insertion.

Y22293 / 63mA FUSELINKS

These encapsulated fuselinks are designed for direct mounting into printed circuit boards and are available as H.R.C. ceramic types.

The H.R.C. ceramic fuselinks are covered in an encapsulation resin and protected in an enclosed case.