MIL-DTL-22759 wire with Seamless Wrap insulation.
Thermax Seamless Wrap PTFE wire insulation and cable jacket offers all the advantage of a tape wrap with the smooth appearance and installation characteristics of an extrusion.
Seamless Wrap features an outer surface that:
-
Looks and feels like an extruded jacket
-
Reduces the possibility of damage during installation or re-routing (no seams to snag)
-
Yields a more consistent final O.D. for cleaner stripping, marking and striping
-
Accepts clear, permanent laser marking.
Because of its uniform cross section, Seamless Wrap is superior to conventional wrapped tape in:
-
Consistent wall thickness
-
Increased dielectric strength
-
Enhanced wet and dry arc propagation resistance
By eliminating the mechanical “weak points” of seams in conventional wrapped tapes, Seamless Wrap:
-
Significantly improves abrasion resistance, particularly wire-to-wire
-
Eliminates delaminating of sintered tape layers
-
Has enhanced crack resistance for use in SWAMP and fire zone applications.
MIL-DTL-25700 Cables
MIL-DTL-25700 (NEMA WC27500) cables incorporate from one to fifteen M22759, MIL-W-25038, or MIL-DTL-81381 wires, plus a single or double shield and a single or double jacket.
Although these cables are designed primarily for use in aircraft and ground support equipment, their high performance and versatility makes them ideal in a wide variety of general-purpose electrical and electronic applications.
The MIL-DTL-27500 part numbering system provides for many combinations of cable construction characteristics.
Many of these cables are available with component wires and/or jackets with the unqiue Seamless Wrap PTFE tape. Additionally, cables with –24 jacket styles and M22759/80 through /92 component wires can be ordered with Seamless Wrap for both the component wire insulation and the outer jacket layer. |
