Branching parts are employed for mechanical tension relief in cable harnesses. 

Helashrink 100 Series

Straight plug-and-socket connector terminal casing. This style is used in conjunction with circular grooved adaptor, providing protection against environmental stresses. The inside lip has been designed to provide extra reinforced stress relief. Special fitting 199-4-G for audio plugs has external ribs for an improved grip.

Straight plug-and-socket connector termianl casing has protection against environmental stresses for circular plug connectors, according to VG. The inside lip is used for a reinforced stress relief.

Helashrink 1100 Series

Right-angle, VG style shape with rib. This style provides connector cable strain relief and can be installed directly onto connector rear thread.

Right-angle, low profile shape with rib, VG/Mil style, often used on airborne harnesses to achieve low profile, compact strain relief and mechanical protection. The photo below shows a shape style that provides connector strain relief and is used in applications of partially loaded connectors with small cable diameters.

Helashrink 200 Series

Branching parts are used for easy, time-saving insulation of the branch point of a cable where it is split into single wires. Branching parts with hot-melt adhesive also serve to relieve the mechanical tension in cable harnesses.

Helashrink 300 Series

Branching parts are used for easy, time-saving insulation of the branch point of a cable where it is split into single wires. Branching parts with hot-melt adhesive also serve to relive the mechanical tension in cable harnesses.

Helashrink 400 Series

Branching parts are used for easy, time-saving insulation of the branch point of a cable where it is split into single wires. Adhesive lined branching parts also serve to relieve the mechanical tension in cable harnesses.

Helashrink 1200 Series

90 degree (right angled) transition parts (T-joints) are used for a simple time-saving insulation of the branch point of cable, where it is split into single wires. Adhesive lined T-joints also serve to relieve the mechanical tension and to protect against corrosion in cable harnesses.

Helashrink 1300 Series

45 degree transition parts (Y-joints) are used for a simple time-saving insulation of the branch point of a cable where it is divided into single wires. Y-joints with hot-melt adhesive also serve to relieve the mechanical tension in cable harensses

Helashrink 313C Series Convoluted boot, low profile with adapter lip.

This style is used with a circular grooved adapter to provide strain relief and if adhesive is used, excellent environmental sealing can be achieved. The convoluted design provides the flexibility to accommodate different cable outlet angles.

Helashrink 333F Series Right angle, boot 90 deg, low profile with adapter lip.

The boot provides connector strain relief in applications with partially loaded connectors, resulting in small cable diameters requiring a high shrink ratio.

Helashrink 313E Series Shim boot, low profile, no adapter lip.

This part is normally used to build up, or shim a cable diameter to facilitate a better fit for components in a cable harness.

Helashrink 313F Series Straight boot, low profile with adapter lip.

This boot provides strain relief in applications with partially loaded connectors, resulting in small cable diameters requiring a high shrink ratio.

Helashrink 412H Series Transition, side breakout, low profile.

This style provides connector cable strain relief and is used in conjuction with a circular grooved adapter.

Helashrink 492H Series Transition 1 to 2 cables, Y, low profile.

This style provides strain relief, sealing and mechanical protection on cable harness breakouts or transitions.

Helashrink 573H Series Transition, 1 to 3 cables, low profile.

This style provides strain relief, sealing and mechanical protection on cable harness breakouts or transitions.